By defaults connection parameters are:
SYNSCAN_UDP_IP=192.168.4.1
SYNSCAN_UDP_PORT=11880
SYNSCAN_LOGGING_LEVEL=INFO
This values can be changed via enviroment vars:
export SYNSCAN_UDP_IP=192.168.5.1
export SYNSCAN_UDP_PORT=11880
export SYNSCAN_LOGGING_LEVEL=WARNING
Also every CLI command has –host and –port parameters. Enviromental vars take precedence.
synscanGoto¶
Do a GOTO to a target azimuth/altitude. Use ‘–’ before AZIMUTH ALTITUDE with negative values
synscanGoto [OPTIONS] AZIMUTH ALTITUDE
Options
- --host <host>¶
Synscan mount IP address
- --port <port>¶
Synscan mount port
- --wait <wait>¶
Wait until finished (default False)
Arguments
- AZIMUTH¶
Required argument
- ALTITUDE¶
Required argument
synscanTrack¶
Move at desired speed (degrees per second). Use ‘–’ before AZIMUTH ALTITUDE with negative values
synscanTrack [OPTIONS] AZIMUTH_SPEED ALTITUDE_SPEED
Options
- --host <host>¶
Synscan mount IP address
- --port <port>¶
Synscan mount port
Arguments
- AZIMUTH_SPEED¶
Required argument
- ALTITUDE_SPEED¶
Required argument
synscanStop¶
Stop Motors
synscanStop [OPTIONS]
Options
- --host <host>¶
Synscan mount IP address
- --port <port>¶
Synscan mount port
- --wait <wait>¶
Wait until finished
synscanWatch¶
Watch values
synscanWatch [OPTIONS]
Options
- --host <host>¶
Synscan mount IP address
- --port <port>¶
Synscan mount port
- --seconds <seconds>¶
Show every N seconds (default 1s)
synscanSync¶
Synchronize actual position with the azimuth/altitude provided. Use ‘–’ before AZIMUTH ALTITUDE with negative values
synscanSync [OPTIONS] AZIMUTH ALTITUDE
Options
- --host <host>¶
Synscan mount IP address
- --port <port>¶
Synscan mount port
Arguments
- AZIMUTH¶
Required argument
- ALTITUDE¶
Required argument
synscanSwitch¶
Activate/Deactivate mount auxiliary switch. ON must be bool (1 or 0)
synscanSwitch [OPTIONS] ON
Options
- --host <host>¶
Synscan mount IP address
- --port <port>¶
Synscan mount port
- --seconds <seconds>¶
Seconds to automatic deactivation
Arguments
- ON¶
Required argument